Simple Model Selection | Small Mixer

STEP1

Select an installation method

Please select the installation method.

Clamp installation

Vise-type fastener that is unified with the main unit.
May be inserted in the location to be secured and then fixed.Can be mounted or removed easily.

Flange installation

Plate for securing with the tank that is unified with the main unit.
Since the bolts are tightened at several places, the mixer and tank can be properly secured.

STEP2

Select a model

What would you like to mix? Select the model type according to the purpose of use.
∗If you do not understand please refer to the movie.

High speed type　50Hz:1450rpm,60Hz:1750rpm

Best suited when you want to mix the target object so as to crush it, or when you want to forcibly draw in a liquid, and fold in and dissolve a powder in it.

Medium speed type　50Hz:300rpm,60Hz:360rpm

Best suited when you want to mix, dissolve, or uniformly distribute a general liquid, or prevent sedimentation.

Low speed type　50Hz:150rpm , 60Hz:180rpm

Best suited for slowly mixing a highly viscous liquid, and mixing the liquid while preventing bubble formation. Also suitable for mixing large quantities, such as in storage tanks, etc.

STEP2

Select a model

What would you like to mix? Select the model type according to the purpose of use.

Medium speed type　50Hz:300rpm,60Hz:360rpm

Best suited when you want to mix, dissolve, or uniformly distribute a general liquid, or prevent sedimentation.

Low speed type　50Hz:150rpm , 60Hz:180rpm

Best suited for slowly mixing a highly viscous liquid, and mixing the liquid while preventing bubble formation. Also suitable for mixing large quantities, such as in storage tanks, etc.

STEP3

Select viscosity

Select the viscosity of the object to be mixed.

* Please contact us if you want to stir a liquid with a specific density of 1.2 or more.

Low viscosity
Like water and alcohol